home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Wonky Flux Batch 2019 02
/
Wonky_Flux_Batch_2019-02.zip
/
Wonky Flux Batch 2019-02
/
071 - EXFER 4.1 4.2.dsk
/
EXFER4.0
/
ÎÏÔÅÓ
(
.txt
)
< prev
next >
Wrap
AppleWorks Document
|
2019-02-17
|
8KB
|
178 lines
O=====|====|====|====|====|====|====|====|====|====|====|====|====|====|====|===
New commands -
B)atch, for sending files using Ymodem. Only accessable by those using a,
Ymodem terminal program (such as ProTERM).
E)xternal commands, for "special" sysop commands. When you type "E", EXfer
will respond with:
[::] ->External:
At this point, you may type one of the following commands:
SWAP library_1,library_2
(ie: SWAP 1,2)
SWAP will switch two libraries around. In the above example, library #1 will,
become library #2, and #2 would become #1.
HELP command
(ie: HELP C)
HELP will allow you to edit one of the entries in the HLP.EXFER file. In theK
above example, you'd be placed in the editor to edit the C)opy help text.
PURGE library
(ie: PURGE 1)
Purge will delete all the files off of a library. In the above example,.
library #1 would have all its files deleted.
RESET library
(ie: RESET 1)
RESET will delete the information file for a particular library. This givesH
the users an opportunity to re-enter file information at a later date.
DUMP library
(ie: DUMP 1)
DUMP will print the directory on paper. The "actual file name on disk" is)
placed under the "Miscellaneous" field.
EXfer 4.0 Files
----- --- -----
Place the following files on your A: ("program") drive:
EXFER.SEG.S
EXFER.SYS.S
Place the following files on your B: ("system") drive:
XT.YMODEM.G
MNU.EXFER
HLP.EXFER
All your EXfer 3.0hs files are "upward compatible" with version 4.0.
A Few Notes
- --- -----
While I don't mind you modifying your EXfer segments, I will make a requestO
that you allow EXfer to identify itself when it is entered, and please do notO
remove the copyright notice that is displayed when the user exits from EXfer.
I have had this stuff "in the test mill" for about 1 1/2 months now, and I'mN
Lsure that I've taken care of most of the bugs. However, problems do arise,
if you find a bug, please report it to me so I can take care of it.
Enjoy!
Brd ->EXfer Support Board
Numb ->61 of 70%
Sub ->Re: Get it while it's hot...
To ->Mike Golaszewski (#235)
From ->Don Powers (#49)
Date ->05/26/87 00:44:29
Mike,
Will the ymodem drive work with TIC?
Brd ->EXfer Support Board
Numb ->62 of 70
Sub ->SECURITY LEVEL
To ->All!
From ->Willie Worchester (#373)
Date ->05/26/87 07:21:39
MIKE DON'T KNOW WHAT HAPPEN BUT YOU PUT 4.0 ON THE SYSTEM FOR DOWNLOAD BUT ASO
OF THIS TIME NO ONE HAS BEEN ABLE TO PULL IT OFF COULD IT BE THAT YOU FOR GOTJ
TO MAKE SURE THAT THE DOWN LEVEL IS THE SAME AS THE VIEW. WE CAN USE THEL
[I]{FOR INFO BUT CAN NOTq GETkO THE [S] TO WORK. SECURITY LEVEL TO LOW????
WILLIE WORCESTER2
THE INNER CIRCLE
Brd ->EXfer Support Board
Numb ->63 of 70
Sub ->EXfer 4.0
To ->All
From ->Mike Golaszewski (#235)
Date ->05/26/87 10:45:00
IOK, there was a bug with the security levels and I have corrected it and
givenM
it to Lance. As soon as he puts the new stuff on-line, you will be able toN
Ldownload the new EXfer (Lance - post here when you have put the new segment
line).
LBy the way, I'd like to stress that if you are a registered owner of EXfer,
do get this upgrade for free.
Brd ->EXfer Support Board
Numb ->64 of 70
Sub ->Re: EXfer 4.0
To ->Mike Golaszewski (#235)!
From ->Lance Taylor-Warren (#1)
Date ->05/26/87 13:44:58
New version is on line...
Lance
Brd ->EXfer Support Board
Numb ->65 of 70
Sub ->Mike's absence
To ->All EXfer owners!
From ->Lance Taylor-Warren (#1)
Date ->05/26/87 22:41:47
Mike has had to leave town till&
Saturday May, 30th. He had a family'
emergency. He has not abandoned you.
Lance
Brd ->EXfer Support Board
Numb ->66 of 70
Sub ->Exfer 4.0
To ->All
From ->Steve Oppenheim (#432)
Date ->05/27/87 08:47:04
Well I have installed exfer 4.0 in my system and it works great EXCEPTH
1) when the user d/l files via the ymodem command the d/l's do not getL
registeredd on his DL variable at all it just bypasses it and shows he hasN
downloaded nothing. say he d/l 2 files .. then his dl = 0 this needs to be
fixed.
2) If a person is in the editor entering his description of the file and heL
somehow looses his carrior then the board will hang forever ! to fix thisN
Lright after the lable EDEDC in exfer.seg.s put a 'on cocar goto terminate"
this sould fix it .. but
I dont know where or how to fix #1 above !! hey mike you got any ideas ?D
thanxk mike !! by the way GREAT WORK ON the exfer 4.0 !! LUV IT !
steve oppenheim
Brd ->EXfer Support Board
Numb ->67 of 70
Sub ->Re: SECURITY LEVEL!
To ->Willie Worchester (#373)
From ->Steve Freitas (#108)
Date ->05/27/87 20:11:02
NSame thing happened to me, Mike. Also, once upon a time (a while back), I did
Cbatch send, and when I went back into the BBS I had turned into an
unvalidated1
usr. Why does Exfer 4.0 throw the flags around?
Brd ->EXfer Support Board
Numb ->68 of 70
Sub ->exfer 4.0
To ->All
From ->Steve Oppenheim (#432)
Date ->05/27/87 20:49:57
MI think mike did a great job on the exfer .. ymodem works great !!! here are
Kfew bugs that i personally have found and thought that we all could try to
rid of !!O
1) the exfer correctly records all d/l of xmodem but dosnt even pay attention+
to the d/l of ymodem and dosnt record it.I
G2) if your on line and in the editor at anyplace in exfer and dump the
carriorO
the board will hang forever.. it needs a on nocar goto terminate i believe in
segment lable 'EDESC' M
K3) I have had probs with the descriptions lately ! if i as a sysop want to
Ka file it asks me if i want to put a description of the file .. well i say
'NO'O
but then when a directory is done that file i just added indicates that there#
is information avalible for it .
have anyone else experienced this and or other related probs?
thanxk !
steve oppenheim
Brd ->EXfer Support Board
Numb ->69 of 70
Sub ->EXfer 4.0
To ->All
From ->Scott Bloom (#103)
Date ->05/28/87 22:12:48
First of all I'de like to say "Good Job" to Mike and congratulations on aO
fine piece of work.. I got it the night it was put up, and installed it in 10L
minutes on my system (with the help of Exfer 3.0) online without a hitch.
I'de also like to point out a bug (of course).. when you spacebar out of theJ
"n"ew scan, it kills you with a syntax error. The problem is in the codeJ
Hright after the label "new.x" and before the "new.2". I think Mike just
forgot:
a semi-colon there but all you have to do is switch the
1 finished, or interrupted
to a
; 1 finished or interrupted
I tried this on this system (hitting the space during a new scan) and it hung0
up on me, so I know it wasn't a bad download..
Brd ->EXfer Support Board
Numb ->70 of 70
Sub ->Copy protection???J
To ->All DARN DARN DARN... LOOK AT XT.YMODEMM
From ->Frank Capo (#270) WITH BAG OF TRICKS, YOU WILL SEE B:D
Date ->05/30/87 05:36:31 FOR THE FILE SPECIFIER....
I like 4.0........but why is XT.YMODEM a ".G" file??? Looks like copyL
protection to me......can't get 4.0 to run on a "non-standard" setup (i.e./
different drive specs). Come on, Mike.......